When we handle paver cleaning & sealing for brick in Arcadia, CA, it comes down to three things: protecting your plants and property, cleaning with the right method, and walking the job with you at the end. On brick, the method we use is low-pressure wash.
How we clean it
Cleaning solution: Soft wash for algae and mildew; a masonry-specific cleaner for efflorescence and mortar haze.
Cleaning brick safely
Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit. Organic growth comes off with a soft wash; mineral deposits such as efflorescence need a masonry-safe cleaner instead of more pressure.
Avoid: Zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet.
How often: Every 2-3 years for most homes.
Is it time for paver cleaning & sealing for brick?
- Weeds and moss growing in the joints
- Joint sand washed out or full of ant hills
- Faded, dull pavers
- White haze (efflorescence) on the surface
- Pavers shifting at the edges
Why it gets dirty
- Rain and washing that remove joint sand over time
- Shade and organic debris in the joints
- Salts rising out of the pavers and base
- UV fading the color
Easy upkeep between cleanings
- Pull weeds before they root deeply
- Top up joint sand where it's low
- Keep downspouts from pouring onto pavers
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Blasting out joint sand and loosening pavers
- Sealing over efflorescence or damp pavers, which traps a white haze
- Using the wrong sealer, which can turn cloudy or slippery
Our process for paver cleaning & sealing for brick
- Inspect the pavers, joints and edges
- Clean the pavers and treat efflorescence if present
- Let them dry and refill joints with polymeric sand
- Activate the sand and let it set
- Apply a paver sealer suited to the look you want
Paver Cleaning & Sealing for Brick cost in Arcadia, CA
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for brick
- Pressure Washing for Brick
- Soft Washing for Brick
- House Washing for Brick
- Driveway Cleaning for Brick
- Sidewalk & Walkway Cleaning for Brick
- Patio Cleaning for Brick
- Rust Stain Removal for Brick
- Graffiti Removal for Brick
- Efflorescence Removal for Brick
- Exterior Mold & Mildew Removal for Brick
- Pre-Paint Washing for Brick
- Commercial Pressure Washing for Brick
- HOA & Apartment Pressure Washing for Brick
Serving Arcadia, CA and nearby towns
Driveways and patios in California collect oil, dust and tire marks over the long dry season. Cleaning with a surface cleaner and controlling the wash water keeps it out of storm drains.
Some cities in California limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
We provide paver cleaning & sealing for brick across Arcadia (ZIP codes 91006, 91007, 91066 and 91077) and nearby towns including Sierra Madre (1.8 mi), Monrovia (2.2 mi), East Pasadena (2.2 mi) and Mayflower Village (2.2 mi). Call (555) 010-0000 for a free quote in Arcadia.
Paver Cleaning & Sealing for Brick: frequently asked questions
How much does paver cleaning & sealing for brick cost in Arcadia, CA?
Paver Cleaning & Sealing for Brick typically costs $600-$1,800 for about 400-800 sq ft of pavers, and usually takes 1-2 days including dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for paver cleaning & sealing for brick?
For brick: usually 500-1,500 PSI with a wide fan tip, held well back from the mortar. What we avoid: zero-degree tips and close-range blasting that erode mortar joints, and strong acids on brick that hasn't been pre-wet. The cleaning solution does most of the work, followed by a gentle rinse.
Is paver cleaning & sealing for brick safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule paver cleaning & sealing for brick?
Every 2-3 years for most homes. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.